<delet this thread>

Subject: <delet this thread> Wed Mar 21, 2012 1:45 am

Posts : 1 Points : 1 Reputation : 0 Join date : 2012-04-04

If possilbe can you please tell me the procedure also.

Subject: ANSWER Thu Apr 05, 2012 1:27 am

sujithnnair wrote:: If possilbe can you please tell me the procedure also.

Do the following preparations before proceeding:
* Make a back up copy of all important data stored on the device.
* Ensure that the battery is fully charge.
* Close any Antivirus software, if you have KIES installed close it also.
* Remove memory card and sim card on the device.
- PC with Windows XP SP2 OS or later
- .Net Framework 2.0 or later
- Samsung Galaxy R
- USB to Micro-USB PC data cable
-Put your phone in download mode
_connect to pc
_ Install ODIN AND OPS FILE

flashing Via ODIN Procedure:
1) Turn off your Samsung Galaxy R
2) Remove your SIM Card and SD Card, just to avoid any issues
3) Extract the previously downloaded firmware packaged.
4) Run ODIN V4.42 multi downloader on your Desktop.
5) Tick on the OPS button then select GALAXYR_v1.0.ops from extracted archive and load it.

6) On ODIN leave the "Protect OPS" and "Auto Reboot" checkboxes checked:

7) Next, Tick on the "One packaged" checkbox, then click on the "One packaged button" on the lower part of Odin and load it

7) Turn the Samsung Galaxy R into Download mode by pressing ( Volume Down + OK + Power ) at the same time.

Cool

Then Connect the phone to PC, the COM port mapping will turn to yellow colour when the device is properly connected and detected.

9) Hit the "Start" button if all things are ready... to begin flashing.

10) Just wait until the program will finished downloading all the binary files. Don't touch it and avoid interrupting the process. It takes just around 5 minutes depends of your computer speed.

11) A word "PASS" with will then display on the left side square if the flashing successfully completes.

If the flashing successfully completes, the phone will then reboot... then unplug it from the PC.
You may then confirm the newly downloaded firmware version name etc by typing **#1234#.
Then change the language settings at your own region.

That's it! [You must be registered and logged in to see this image.]

Disclaimer: We shall not be held responsible for anything happens to your phone by using this guide. Proceed at your own risk

Posts : 1 Points : 1 Reputation : 0 Join date : 2012-05-19

Hi sorry if my English is not perfect, I am Italian and the only guide I could find and yours, but I downloaded all the files that you put I downloaded ''boot.img'' but not is the file as you described in the guide does not have an extension .ops but where do I find the file ops?
I thank you in advance

Posts : 1 Points : 1 Reputation : 0 Join date : 2012-06-17

Hi, could you please help in providing the GALAXYR_v1.0.ops file as I cannot see it in the download. Thanks n advance.